Abstract:
Discharging industrial colored wastewaters into aqueous environments can cause adverse effects on aquatic life due to the
toxic nature of synthetic dyes. The present study aimed to evaluate the efficiency of using natural South African magnesite
to remove an anionic dye from aqueous systems. The natural nanosorbent was characterized by Transmission Electron
Microscopy, Fourier Transform Infra-Red and X-ray Diffraction analysis. Various important parameters namely contact time,
initial concentration of dyes, magnesite dosage, solution temperature and solution pH were optimized to achieve maximum
adsorption capacity. The XRD results revealed that raw magnesite contains magnesite, periclase, dolomite and quartz as the
crystalline phases. Optimum conditions were observed to be 60 min of agitation, 0.1 g dosage of magnesite per 50 mL of
aqueous solution, 40 mg/L initial dye concentration and room temperature. Removal of DR81 from aqueous solution was
observed to be independent of initial pH of the aqueous solution. The adsorption ratio toward 40 mg/L of DR81 was 96.27%.
The results indicate that natural South African magnesite is an efficient material for the removal of DR81. The magnesite, due
to high accessibility, low cost and non-toxicity can be considered a good replacement option of other high cost materials used
to treat colored wastewater especially in developing countries like South Africa
